8 Ball (or Eight Ball)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a print you can really get behind!
- Ocena
- 4,5 / 5
- Polubienia
- 35
- Pobrania
- 400
- Wydruki
- 2
- Wyświetlenia
- 2829
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Public Domain
This is a print you can really get behind!
Note : Alternatively consider printing just the "8 hemisphere" - looks interesting sitting on the desk.
The idea for a sphere made from two hemispheres screwed together was taken from "schraitle", but I made a new design which uses a bit less filament (and of course has another obvious difference). The nominal diameter of this ball is 65mm.
The talon holder shown in the photo is a separate print referenced under re-mixes.
OnShape 3D CAD files :
Print instructions
Print in PLA using the 3mf files provided. Otherwise :
- 10% rectilinear infill
- variable layer height (more layers at the top of the prints)
Note : When removing the "surround" (white parts around the number) be careful about the little pieces in the middle of the eight - they're easy to misplace. Ask me how I know!
Also - the surround pieces are a tight fit, but they will go in with care. Once they are in, you will likely not be able to remove them.