Rock Candy: Easter Edition (PEEP)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I apologize to the community, but here we go... Do you smell what the PEEP is cooking?
- Ocena
- 5 / 5
- Polubienia
- 16
- Pobrania
- 79
- Wydruki
- 1
- Wyświetlenia
- 442
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Spring & Easter
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Just in time for Easter! Rock Candy… Peeps!
I apologize to the 3D printing community in advance, for this contribution. I have never printed anything with The Rocks face on it before, much less created it. After printing several fuzzy skin PEEPs for people around the office, I work with people who I knew would get a kick out of this. And there is some irony… or symmetry?… with the fuzzy Peep with a smooth Rock face.
Thanks and attribution to Dante for making the PEEP model.
PRINT SETTINGS
Walls: at least 2
Supports: Not required
Infill: I printed with 10% Lightning.
Brim: You know your printer. I used a 3mm Brim separated by .15mm.
Fuzzy Skin settings from picture above in PrusaSlicer (DO NOT USE IF YOU PRINT ‘FUZZY’ MODEL, the fuzz on that is already part of the model) -
Fuzzy Skin: Outside Walls
Fuzzy Skin Thickness: 0.3
Fuzzy skin point distance: 0.3
NOTE: There is some weird slicer anomaly. It is placing a layer with fuzzy skin between the blocker and the face. That is the version pictured above. It looks great. Like he is wearing a suit, but I added the “fuzzy” version that I used Blender to make the skin actually jagged/fuzzy. No need for fuzzy settings on that one. I added the smooth version also.