Wall mounted spice rack for square footprint bottles
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3x and 1x wall / cabinet mountable spice rack for bottles with a square footprint of up to 45 mm.
- Ocena
- 0 / 5
- Polubienia
- 40
- Pobrania
- 258
- Wydruki
- 0
- Wyświetlenia
- 1156
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
This spice rack is meant to be mounted to a wall or cabinet door. It's designed for bottles with a square base of 45 by 45 mm, which I bought from Amazon.
The x1 Version is a holder for a single bottle the x3 version is a rack for three bottles.
It can be printed without support. I've been using PLA+ though, if you can print without too much stringing I'd recommend PETG. Since it's designed to be hanging inside a kitchen cabinet, something is bound to bump against it sooner or later and standard PLA might not hold up. Though PLA should of course work perfectly fine otherwise.