Wedding Table Name Tag - easy to print - no glue needed
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Orientacyjna cena wydruku pliku
0,13 € – 0,16 € netto (bez VAT)
Dla pliku: Wedding-name-holder-Ring1_0.15mm_PLA_MINI_11m.gcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 0,15 € netto (środek widełek).
- Masa podana przez autora
- 1 g
- Czas druku podany przez autora
- 11,4 min
- Materiał u źródła
- PLA
- Materiał wyceny
- PLA
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
Name tag for a wedding. Easy reference for each person where to sit. Nice card holder, based on a design on printables.
- Ocena
- 5 / 5
- Polubienia
- 29
- Pobrania
- 158
- Wydruki
- 2
- Wyświetlenia
- 961
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Nice name tag, that we use for our wedding.
The card holders can be put on the table.
We vary the colours, based on the food preferences of each and every guest.
Further, I uploaded a sliced version with color change for the Prusa Mini+.
If you print with 0.15 / 0.2 mm layer height, there is a nice fit of the rings to the base. There is no need for glue :)
If anyone wants to remix the design, I added the Autodesk Fusion360 Extract as well :)
For questions please feel free to reach out to me.
Best regards Torben
Concerning the remix.
Adjusted the versions on printables.
Made 3 pieces out of it. This helps to have a nice resolution of the result, even though you print at 0.15 layer height. Print time is reduces by half, whilst print quality increased.