Wall Mount for "Ulanzi Awtrix Smart Pixel Clock"
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A wall mount for the "Ulanzi Awtrix Smart Pixel Clock"
- Ocena
- 5 / 5
- Polubienia
- 43
- Pobrania
- 318
- Wydruki
- 4
- Wyświetlenia
- 2931
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
After using a couple of home-made Awtrixes / PixelIts, I recently discovered the pre-built Ulanzi Smart Clocks, which are very cheap and are able to run both PixelIt and Awtrix light.
So I added a few to my smart home, but in some places I needed to mount them on the wall. There was no wall bracket available, so I designed my own.
It has two holes for screws 16cm apart and a small space behind the clock to connect the power supply. The original cable will not fit because I kept it small! You will need an angled USB-C cable or an adapter. You can also use the extra space to tidy up any excess cables. There is a small double breakout cover in the bottom plate to lead the cable down. I did not design it as a hole because some of my clocks are connected from the top.