Grow Tent Pole Fixture Ø22mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fixture for 22mm support poles in plant tents such as Homebox, Vivosun etc. Prevents the Poles from moving out of place.
- Ocena
- 0 / 5
- Polubienia
- 32
- Pobrania
- 133
- Wydruki
- 0
- Wyświetlenia
- 1354
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Standard Digital File License
Grow Tent Pole Fixture (Ø22mm)
This fixture is designed to secure support poles to the sides of the indoor plant tent. Unlike the hooks supplied by the manufacturers of the tents, these fixtures clamp onto the tent's vertical poles as well as the horizontal support poles using screws. This prevents any slipping or rotating of the poles and allows mounting equipment such as clip-fans to them.
Requirements
In order to install the full “U”-shaped set of fixtures, 28 M3x8-10 screws with a head diameter of ≤5,5mm are recommended, such as DIN84 or DIN912. Additionally 28 M3 DIN562 square nuts are required.
Alternatively, to secure a single pole, 2 single x holders and clamps need to be printed and 12 screws are required.
I suggest printing in PET-G.