Connected Battery Stand - CR2032 Type
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
"velcro style" connected battery stand remixed for coin battery cells
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 248
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
A remix of this great model by @ceres to expand the “ecosystem” for the commonly used CR2032 battery.
I designed this stand so it could be attached to the side of the “regular” AA/AAA batteries stand.
It fits 10 CR2032 batteries with enough space in between to allow for easily grabbing them.
You could also conveniently use it for storing 2 CR2016 batteries in each cell, since they're exactly half the thickness of the CR2032.
I printed mine with a 0.3mm nozzle at 0.16mm layer height at a relatively slow speed to try to preserve the “velcro” details as much as possible. No sanding or filing was required.
Important! Please read before printing!
As per u/Exception-Rethrown's advice, it's best to check the resistance of your filament before starting to print, because batteries might end up drained if resistance is not high enough.