Benchy Bookends
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Torture Test Taking Time
- Ocena
- 0 / 5
- Polubienia
- 53
- Pobrania
- 138
- Wydruki
- 0
- Wyświetlenia
- 868
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial
The final boss for your 3D printer. A big bookend benchy set.
Dimensions
The height and width dimensions are as follows:
W- 74.8mm
H- 110mm
Length For each bookend:
Benchy front-end L- 85.3mm
Benchy rear-end L- 83.8mm
Settings
These beasts can be printed with:
0.6mm nozzle
0.3mm layer height
10% infill
Any filament color of your choosing.
Support material,
At a low PLA temperature, these model does not need ANY support (0.6mm nozzle). Small cleanup is all you need just with any other print. It is imperative to print with a larger than 0.4 mm nozzle to reach these results.
Scaling
I made this model to be printable for any printer. The size is smaller than other bookends. BUT DO NOT WORRY! Almost all modern-day slicers “including Cura” allow you to upscale your models. If You have a larger printer and a lot of filament, make the model as big as you wish.
As always,
Happy printing