Bambu Lab X1 Rear Vent Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a magnetic rear vent adapter for the Bambu Lab X1 Carbon.
- Ocena
- 5 / 5
- Polubienia
- 133
- Pobrania
- 851
- Wydruki
- 4
- Wyświetlenia
- 6002
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
This magnetic adapter is for the Bambu Lab X1 printer.
The adapter allows you to attach a vent hose and pipe the fumes out of the room or the immediate area.
This adapter fits a 3" air duct hose. This adapter also uses four (4) magnets (0.5 inch diameter, .010 thick). The mounting holes for the magnets are oversized (0.51 diameter) for an easy fit. Depending on you printing tolerance, you might need to super glue the magnets in place.
The magnets hold the vent adapter in place, but will slide around if moving the printer. Once your printer is in place, the vent will stay in place.
Filament - I used PLA+ or PLA Carbon Fiber
Support - None
Brim - 5 to 8mm
Layer - 0.2mm
3mf file using Bambu Lab Studio (slicer)