Phase One 65 Numpad (KBDPad Mk2 PCB)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Phase One 65 case for a KBDPad Mk2 PCB
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 817
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Rather than buying a KBDPad Mk2 full kit, my friend and I realized we could buy 2 PCBs and plates for the same cost and 3d model/print our own cases. My daily driver is a Phase One 65, so I made a case to match.
You'll need:
- 4x M3x12 screws
- 4x M3 nuts
- 1/16" foam or any type of thin foam
- Super glue
I printed each of these files separately for easier printing, and super glued them together.
The front badge, back badge, weight badge, light badge, and light badge nub are all straightforward prints. You'll need to orient them correctly (I think they imported funky from Solidworks for some reason) so that the top faces are flat against the bed. The half base top used supports for the screw holes.
I printed the bottom base in two parts so that the top and bottom faces of the bottom base were smooth. I printed the half base bottom with the badge cutout facing towards the bed.