Borromini Star Christmas Tree Topper
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a Christmas Tree topper styled after some of the architectural details on Borromini's Sant'Ivo alla Sapienza…
- Ocena
- 4,769 / 5
- Polubienia
- 126
- Pobrania
- 522
- Wydruki
- 16
- Wyświetlenia
- 3448
- Oceny
- 13
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution
EDIT 2023/01/27: Added STP files at the request of Robdanig for easier remixing!
Also, if you like the idea of adding LEDs, please check out the remix by mcurtis!
This is a Christmas Tree topper styled after some of the architectural details on Borromini's Sant'Ivo alla Sapienza church in Rome, Italy. I really appreciated the shape of it when we were learning about it, and wanted to create a 3d model, so I thought this would be a great use for it!
The design is broken into seperate peices for easy printing. There is a core and then a series of spikes. The core has pins to locate the spikes, and they are of different sizes so that things don't get mixed up.
A bit of extra tolerance is added into the model to hopefully make assembly go easier. It also adds some nice shadow lines to the assembled piece!
Please print:
1x 01 Borromini Star Core
8x 02 Borromini Star Lower Spike
8x 03 Borromini Star Middle Spike
4x 04 Borromini Star Upper Spike A
4x 05 Borromini Star Upper Spike B
1x 06 Borromini Star Top Spike
Happy printing!
Print instructions
Category: Decor Summary
This is a Christmas Tree topper styled after some of the architectural details on Borromini's Sant'Ivo alla Sapienza church in Rome, Italy. I really appreciated the shape of it when we were learning about it, and wanted to create a 3d model, so I thought this would be a great use for it!
The design is broken into seperate peices for easy printing. There is a core and then a series of spikes. The core has pins to locate the spikes, and they are of different sizes so that things don't get mixed up.
A bit of extra tolerance is added into the model to hopefully make assembly go easier. It also adds some nice shadow lines to the assembled piece!
Please print:
1x 01 Borromini Star Core
8x 02 Borromini Star Lower Spike
8x 03 Borromini Star Middle Spike
4x 04 Borromini Star Upper Spike A
4x 05 Borromini Star Upper Spike B
1x 06 Borromini Star Top Spike
Happy printing!
Print Settings
Printer Brand: Anycubic
Printer: Kossel
Rafts: Doesn't Matter
Supports: Yes
Infill: 10%
Notes:
I would only use supports for the core, as it has some impossible overhangs. Everything else should be good.