WWE announcer's table - breakable
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Rock bottom some jabroni through the announcer's table!
- Ocena
- 4,667 / 5
- Polubienia
- 79
- Pobrania
- 1028
- Wydruki
- 4
- Wyświetlenia
- 4495
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
WWE announcer's table that breaks apart. I use 5mm x 3mm magnets to hold it together. The geometry of the table makes it extra tough so doing a power bomb directly on top of the table might not break it apart but jumping off the top rope and coming down at an angle would do the trick.
You can get the magnets from amazon.
https://www.amazon.com/gp/product/B09Y63J44H/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1
I print at .6 later height with a .8mm nozzle. Your results may vary with different settings and sizes.
Breakable table for WWE figures is located here:
https://www.printables.com/model/445020-breakable-folding-table-for-wwe-figures-or-bills-m
WWE Ring stairs - 2 parts is located here
https://www.printables.com/model/450734-wwe-ring-stairs-2-parts-with-magnets-remix
WWE Ladder is located here:
https://www.thingiverse.com/thing:2522475
Print Settings
Printer brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
Yes
Resolution:
.6
Infill:
20%
Filament brand:
Cheap stuff
Filament color:
Violet
Filament material:
PLA+
Notes:
Supports are really only needed for the cover. Everything else should print fine without them.