1 / 3
Sparky the Adorable Robot
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An adorable little robot that will keep you company on your desk.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 249
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (18)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (5)Powiązane
Say hello to Sparky the adorable robot! A cute little friend that can keep you company while you work. Make Sparky your own by printing him in any colour you like!
Instructions
- Printing should be pretty easy. I recommend using a small layer height, to preserve the finer detail/curves in this small sized model. Most parts will print without supports, but should be used for: Head (Front), Body (Front), and Head (Back).
- Brims are strongly recommended for all of the head and body detail parts. The surfaces with brims will all be hidden when the model is assembled.
- Keep an eye on the direction of the Head Plate when assembling the model. The holes for the antenna parts should be towards the backside of the model.
- Also keep an eye on the direction of the Body Plate and its buttons. The plate has a curve which should match the curve of the body when assembled. The buttons in the plate also come in two different heights so that they can match the body curve.
- The 8mm Button and 10mm Button on the body detail also have a curve to match the body, so make sure you line up those buttons in the correct direction as well.
- You will need to print two copies of the Antenna, and Side Ridge parts