Easter vibes for your rubber duckies!
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
We made these bunny ears to give an Easter vibe to our rubber ducky.
- Ocena
- 0 / 5
- Polubienia
- 22
- Pobrania
- 54
- Wydruki
- 1
- Wyświetlenia
- 495
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Spring & Easter
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
It's Easter time, and we just needed to prepare our rubber ducky for the season.
We made these bunny ears that fit perfectly.
The rubber duck we used as a model is one of those shipped with BigThreeTech components, but the size should be pretty standard. You can always scale it up or down if you need to.
Oh, in case you are seeing this in a different season, you can also check our Ghost Cloak for rubber duckies.
If you print this, let us know! Tag us on Instagram and we will feature your print :) Our user is @twothingies
3D print settings
We printed this using a 0.4 mm nozzle, at 0.15 mm layer height.
The print does not need supports, but we do recommend using a brim.
Follow us / support
Did you like this design? Follow us on Instagram! We are @twothingies
If you really like what we are doing and want to support us, you could buy us a coffee or two!
Selling prints of our designs
Please be aware that our designs are available for free for non-commercial purposes only.
If you would like to sell 3D prints of our designs in your store, you can join one of our membership tiers!
If you have other ideas, we would be happy to discuss that with you! Please send us a message if you are interested at [email protected]
Disclaimer
Due to the different properties of 3D printing filaments and the tolerances of different machines, you might need to scale up or down some of the print files, in case they don't fit when you print them.