Adapters for micro photography
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapters (Nikon F-Mount) for using microscope objectives via Raynox DCR as tube lens
- Ocena
- 0 / 5
- Polubienia
- 22
- Pobrania
- 94
- Wydruki
- 0
- Wyświetlenia
- 1003
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution
Adapters (for Nikon F-Mount) for using microscope objectives over Raynox DCR-150 as tube lens.
Can be used in front or reverse orientation of the Raynox.
Adapters for RMS thread and for Mitutoyo objectives (26 mm).
For better "grip" between the tube parts, recommend to put 3-4 stripes of tape on the front tube. (Designed it a bit looser because of tolerances and clearances of 3D printing)
All can be printed without supports (probably need to rotate upside down in slicer).
For threads sections use 0,1 mm resolution/layer height, for the rest 0,25 or even higher is possible to reduce print time.
edit 11.4.2023: added separate holder with arca swiss and one tube with integrated one
edit 14.4.2023: added example result photos