Beautiful Woven Basket in 142 Sizes.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Orientacyjna cena wydruku pliku
9,96 € – 12,17 € netto (bez VAT)
Dla pliku: LR2316-H080-D160-B100 MINI Print_0.2mm_PLA_MINI_13h6m.gcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 11,06 € netto (środek widełek).
- Masa podana przez autora
- 96 g
- Czas druku podany przez autora
- 13,1 godz.
- Materiał u źródła
- PLA
- Materiał wyceny
- PLA
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
A beautiful woven basket in 142 different sizes. Diameters.
- Ocena
- 5 / 5
- Polubienia
- 145
- Pobrania
- 801
- Wydruki
- 10
- Wyświetlenia
- 2552
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Share Alike
This is my design of a woven basket. It requires no supports for printing.
Video
How to Print the Basket
A Prusa Slicer example project, LR2316-… Print.3mf, is available with all recommended settings. Feel free to use this, or refer to the table below:
| Orientation: | Basked base on printer bed. |
| Nozzle Size: | 0.4mm recommended (0.6mm or 0.8mm may work) |
| Layer Height: | 0.2mm or matching for nozzle size |
| Filament Materials: | PLA recommended |
| Perimeters: | 2 perimeters |
| Infill: | 15% |
| Prusa Slicer Profile: | "0.2mm Quality" |
Common Quality Issues
Due to the thin structures of this basket, you might encounter various issues depending on the filament and printer used:
- Stringing: This common problem typically occurs when the print temperature is too high, the filament has absorbed moisture, or the retraction length/speed is too low. Search online for the appropriate solution tailored to your printer. If you only notice stringing without any other visible defects, carefully use a heat gun in very short bursts to remove the strings after printing.
- Deformations: This model may be susceptible to deformations, particularly when using shiny filaments that tend to warp. To address this issue, try reducing the print speed to 50%. This adjustment often resolves such problems.
Dimensions
The filename has the format:
LR2316-H<height>-D<outer diameter>-B<base diameter>.3mf
Height (H)
The value after the letter H is the height in millimetres. The value is rounded, as you have to add 0.6mm to the total height of the final print.
Outer Diameter (D)
The value after the letter D is the outer diameter of the upper rim of the basket in millimetres.
Base Diameter (B)
The value after the letter B is the diameter of the base of the basket in millimetres.
Base Angle
In the catalogue you also find the base angle for each basket. This angle defines the most extreme overhang of the model. The design limits this angle to 45º, that should be easily printable with every 3D printer. For even better results, chose a model with a steeper angle, around 50º.
About the Print in the Photos and the Video
The basket you see in the photos and the video is printed on an Original Prusa i3 MK3S+ using one of 3DJake's magicPLA filament.
It is the model LR2316-H080-D200-B100.
More Details in the Catalogue
The catalogue PDF also contains helpful information, such as lookup tables and illustrations for each basket. You find the PDF in the files section.
Explore More from Meti·kumi
Interested in my designs? Browse through my collection of 3D models:
👉 https://metikumi.com/3d-models/
Stay connected on social media for the latest updates and work-in-progress insights:
Conclusion
I hope this design adds a touch of beauty to your home. If you enjoy it, please rate it and upload photos of you print.
Happy Printing!