1 / 10
Ender 3 S1 Fan Mount & Duct (Stock 40x10 Radial Blower Fan) — zdjęcie 1
1 / 10

Ender 3 S1 Fan Mount & Duct (Stock 40x10 Radial Blower Fan)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This Fan Duct replaces the original forward facing one and repositions the stock 40x10 radial blower fan to the right.

Ocena
5 / 5
Polubienia
66
Pobrania
423
Wydruki
3
Wyświetlenia
3147
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Standard Digital File License

Ender 3 S1/Pro/Plus Sprite Fan Duct

A specifically designed Sprite Extruder Fan Duct to suit the Ender 3 S1 series 3D Printers.

This Fan Duct component is a low-level upgrade that addresses the factory inability to a clear view from the front of the extruder by off setting the fan duct while maintaining all factory components as a standard and maintaining the 40x10 Radial Blower performance characteristics.

A Fan Duct replacing the original forward facing one and repositioning the stock 40x10 radial blower fan to open up a more viewable path to the extruder nozzle.

This is a direct fitment with no messing around to make it fit. 

Information about the build:

Parts required to complete:

6x M2 brass heatset inserts

3x M3x8mm buttonhead screws

2x M2x6mm buttonhead screws (Blower Duct)

4x M2x6mm buttonhead screws (40x10 Radial Blower Fan, or optionally use your originals)

 

An extremely easy installation with detailed photo instructions.

Fan Duct can be raised or lowered 1mm each way from its centre and additionall the nozzle too.

 

I use Prusaslicer as my go to slicer with paint supports activated to acheive an absolutely flawless print. Your settings will play an important part so please feel free to message me if you need some finer details.

Print in PLA+/PETG, your preferred.

3 files are supplied in .3mf, .stl, and a word doc for the installation, wrapped in a .pdf.

I will be publishing an upgrade to this one as a dual 40x20 Radial blower and also a single in the nearest future, so keep a look out for these.

 

Tagi