Universal Caliper Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple Caliper mount inspired by https://www.thingiverse.com/thing:3691708 from agryson.
- Ocena
- 4,904 / 5
- Polubienia
- 343
- Pobrania
- 1722
- Wydruki
- 55
- Wyświetlenia
- 9277
- Oceny
- 52
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Simple Caliper mount inspired by https://www.thingiverse.com/thing:3691708 from agryson.
Should fit a wide range of calipers, but if yours doesn't fit you can adjust the uploaded Fusion 360 file.
It's designed to mount on a peg board with 15mm spacing.
I used M3 brass inserts to screw it in from the back of the peg board.
[M3x4mmx4mm]:
And to make your caliper stick without wiggeling you can insert magnets from the back of the mount.
There are holes for different magnet diameters. Ø8mm Ø10mm Ø12.8mm
I recommend printing the part with multiple colors with the filament swap technique. If you don't know how its done: https://blog.prusaprinters.org/color-print/
Please share your prints ;)
The inbus tool mount you see on the last picture is also designed by me:
https://www.prusaprinters.org/prints/14517-pb-swiss-tools-inbus-set-mount
Edit V1.1
Added a version with 3mm countersunk holes to mount it to a wall
Print instructions
Make sure to enable supports on the hooks!