Thrunite Flashlight Glow in the Dark Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Orientacyjna cena wydruku pliku
0,35 € – 0,42 € netto (bez VAT)
Dla pliku: Glow in the Dark Flashlight Cover.gcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 0,39 € netto (środek widełek).
- Masa podana przez autora
- 2 g
- Czas druku podany przez autora
- 31,2 min
- Materiał u źródła
- PLA
- Materiał wyceny
- PLA
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
Forget losing your flashlight in the dark again. Charges with use and daylight and glows at night so you can find it
- Ocena
- 0 / 5
- Polubienia
- 24
- Pobrania
- 98
- Wydruki
- 0
- Wyświetlenia
- 1057
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Share Alike
Description
Here's my Glow in the Dark Flashlight Cover, a customizable and versatile addition to your Thrunite flashlight (mine is a Thrunite Archer Pro to be specific). This cover is designed to fit on the end of the flashlight and allows you to easily locate your flashlight at night. The cover can be easily resized to fit your specific flashlight model. Allows your flashlight to work as a normal light and when you turn it off the glow in the dark cover allows you to easily find it.
The cover is perfect for a variety of applications, including hunting, photography, and emergency situations, where locating your light can be critical. The cover is easy to install and use, and it's a great way to enhance your flashlight's capabilities. So, it's a great addition for anyone who uses flashlights regularly and for those who have multiple flashlights.
Warning! - Glow in the dark PLA is VERY abrasive! It will erode normal brass nozzles and it is therefore recommended you use a hardened steel or other nozzles specifically made for abrasive materials.
Printing
Print front end down and the ring in a flat orientation.
Filament - Green glow in the dark PLA. I chose green as it glows longer and brighter.
Infill - 100%
Layer Height - .20mm
Supports - None
Parimeters - 2
Additional Parts - None
Bed Adhesion - You may want some glue stick to ensure good bed adhesion.
Rafts - You may need these if it doesn't stick well
Scaling - This can be scaled up to fit your different sized flashlights, but your mileage may vary depending how large you make it.
Filament Change - None
Post Printing Notes: Just cut the gel filter to size and then place in the adaptor. Slide the ring into place and you're done!
Happy Printing!
You can help
To help cover the expenses of printing prototypes for the models I share, please consider a donation by purchasing an item from my Amazon wishlist here
Please leave a comment and let me know how you like this model.
Here are my other similar models related to EDC
printables search – EDC @HandyHandcrafts
Also, if you like this model, check out my other models over here:
https://www.printables.com/social/130916-hendersons-handcrafts/models
Award winning Model “Japanese Toolbox” for the "Box Contest: here:
https://www.printables.com/model/260100-japanese-toolbox-inspired-locking-lid-box
Below are just few of my other models |
 |