Tevo Little Monster advanced enclosure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A modular enclosure that can be built in different configurations.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 64
- Wydruki
- 1
- Wyświetlenia
- 432
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is my enclosure for the Tevo Little Monster. Unlike others, it allows full access to the inside, so that you are not obstructed by standing walls if you want to take out printed parts or work on the actuator or extruder.
The file set allows for making three kinds of modules:
• A fullsized door (left or right)
• A fullsized wall
• Two half-sized doors
My recommendation is to make two fullsized doors and one wall. Thus you will have access to the inside from two (of three) sides (which is very helpful for removing big prints and mounting/unmounting of actuator and extruder).
All modules, no matter if wall or door, are mounted to the printer without damage (meaning, there are no holes to drill or parts to be glued to the printer).
Basically, the printer has three sides. Each of these sides can be equipped with either a wall module (i.e. a wall that does not move) or a door module (i.e. a “wall” that can be opened). In fact, neither three door modules nor three wall modules make sense. You need either two walls and one door (easier to build) or one wall and two doors (more comfortable to use).
Then, there are two variants of how a door module can look:
This is the first door variant, a single door that flaps to one side (to the right side, in this case). It can be used together with two walls or with one wall and a (left) door.

This is the second door variant (using the same printed components), a two-wing-door in one module. It can be used together with two walls.
I have added an extensive PDF manual to the uploaded files that hopefully covers all questions one might have when planning to build this thing…. well, if it does not, just drop me a line and we'll find out!