[Easter Project] AnkerMake M5 Bunnny Print Head (aka EasterMake)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A fun easter project for all ages!
- Ocena
- 5 / 5
- Polubienia
- 20
- Pobrania
- 52
- Wydruki
- 2
- Wyświetlenia
- 498
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
A fun little easter project for you and your family to print in celebration of Easter!
The assembly is mostly done by supergluing the parts together, but the ears require M3x8mm countersunk bolts and two M3 nuts. I think you may be able to get away with super gluing the ears to the top housing piece, but I was worried they would fly off at high print speeds.
The files can be printed at 0.2mm layer heights and at full speed! I recommend setting minimum layer time to at least 8 seconds so the locking tabs don't melt.
Feel free to print and sell this and remix culture is totally allowed.
The egg pictured comes from this lovely collection of models:
https://www.printables.com/model/401207-xl-easter-eggs