Star Wars Lightsaber and staff Wall Mount Cradle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is made to fit perfect in the Home Depot "deathstar" wall panels from Home Depot.
- Ocena
- 0 / 5
- Polubienia
- 25
- Pobrania
- 112
- Wydruki
- 0
- Wyświetlenia
- 1565
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution — Noncommercial
Home Depot sells these 3' x 6' panels that look exactly like the interior walls of the Death Star from Star Wars. Many people have used them to make display walls as I have. I made this mount to fit perfectly in the slots so that you can mount your lightsabers to the wall. There are three versions. The Staff will fit a longer staff style saber. The standard will fit most sabers except the graflex style. The graflex is designed where one arm has a slightly larger radius than the other so when placed in the cradle the rubber grips don't cause it to be slanted/crooked in the mount.
I printed mine using .3mm (draft), 15% infill. I printed mine oriented as in the STL using supports for the channels on underneath and for the curved arms.
The Staff version is designed into two pieces to fit on a 210mm bed. You must epoxy them together and remove the .5mm sacrificial thin walls on the one half before gluing or mounting.