Longer LK5 Dual Blower Direct Drive
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix. changes attachment point to the 2 screws that hold the fan cover on. I don't use the cover as I feel its a bit…
- Ocena
- 4,5 / 5
- Polubienia
- 12
- Pobrania
- 200
- Wydruki
- 3
- Wyświetlenia
- 1402
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Remix. changes attachment point to the 2 screws that hold the fan cover on. I don't use the cover as I feel its a bit quieter without it. w. Flat side down. I am using a spider hot end and cheapo dual gear extruder.
EDIT: moved model so it should print as is. changed holes and pegs to holes for screws and heatsert nuts. added holes on inside for drag chain. notched wall so short stepper can sit with plug on back
Parts needed
2x m3x30ish bolts
2 x m3 nuts
2x m3 heatset nutserts
2x m3x 8ish bolts
EDIT2: tested and made some minor improvements. Chain holes can be directly threaded in-no need for heatsets. opened up reliefs for bolt heads on top piece. should now import in the orientation and alignment for proper printing.
EDIT3: moved up chain mount to match other side
EDIT 4 : added a third hole to mount the two halved
EDIT 5: may need to space out the hotend slightly with washers as it doesn't line up perfectly on mine. using a different hot end now so cant really check. may make more modular/adaptable in future update
Print Settings
Printer Brand:
Longer
Printer:
Longer LK5 Pro
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
40
Filament: something pla purple
Category: 3D Printer Parts