Shopping Cart Coin Keychain (PULLS OUT!)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A coin replacement keychain to unlock shopping carts. Can be pulled out of most carts, so you can stow away your keys!
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 235
- Wydruki
- 3
- Wyświetlenia
- 1211
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Not many people carry coins anymore, but everyone carries keys! So I designed this keychain to help with the problem. It works with carts in Switzerland and should work with european and american carts (1 euro and Quarter respectively). After unlocking the cart, just pull on your key ring and it should pop out. It is 24 mm in diameter, so if it doesn't work, try scaling it down to 23mm.
Print Settings:
- Recommended to print in PETG for longevity. PLA also works but has not been tested long term.
- 0.2 mm layer height
- 0.4 mm nozzle
- 100% infill (recommended to adjust top and bottom layers to have no infill layers)
Post processing:
- If you have a problem with layers bulging at the top, sand it flat. It is not a necessary step, but it improves ease of use.
- If you like, you can paint the cart to stand out, or make the top layer a different color. Whichever you prefer or can do.
Enjoy! Comment if you have any problems you wish me to address.
If you like my models, please consider buying me a coffee at buymeacoffee.com/3d_design_fun so I can dedicate more time to sharing helpful models with the world.