Protractorholder for pinboard by KMS
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The Protractor holder is part of the KMS pinboard system.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 353
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The Protractor holder is part of the KMS pinboard system.
Due to the standardised dovetail, the holder can simply slide onto the dovetail.
Basicholder (perforated sheet):
https://www.prusaprinters.org/prints/44241-basic-holder-for-pinboard-by-kms)
Basicholder (woodscrew/universal):
https://www.prusaprinters.org/prints/44603-basic-holder-for-pinboard-by-kms-universal
If you want to test if the holder fits , just print a template by cutting the model or use the attached template STL File.
The width of the Protractor seen in the picture is 20mm.
Check out the KMS pinboard collection ;D!
https://www.prusaprinters.org/social/58577-kerle-makerspace/collections/31461
Happy printing and stay tuned :D
Yours KERLE MAKERSPACE
PS: Feel free to like or write a comment ;D keeps me motivated on sharing ideas ;D
Print instructions
PRINTING TEMPERATURES:
| Nozzle | Bed | |||
|---|---|---|---|---|
| First Layer | 240°C | 85°C | ||
| Other Layers | 250°C | 90°C |
Filament: Prusament PETG
Supports only on Printbed and for better dovetail quality support Bridging :D