Bite! Peeps Bunny Keychain Easter Marshmallow with a Bitemark
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Who took a bite out of my marshmallow Peeps Bunny ! ?
- Ocena
- 5 / 5
- Polubienia
- 314
- Pobrania
- 1033
- Wydruki
- 14
- Wyświetlenia
- 3138
- Oceny
- 12
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Costume Accessories
- Licencja
- Standard Digital File License
Who keeps eating my Peeps?
This is a two-piece print remix of my Peeps Marshmallow Bunny! Print the marshmallow portion separately, without the fuzzy skin. Once printed, the two pieces should snap together, but if needed, a CA glue can be used to keep your marshmallow center where it belongs.
To achieve that classic Peeps appearance, make sure to use fuzzy skin on the outer wall. Below, you'll find the print settings that I used.
For the finishing touch, I added a small dab of black acrylic paint to the eyes and nose using a cotton swab.
Print Settings:
0.2mm layers, 3 perimeter walls, 10%-20% infill, no supports, fuzzy outer wall
Fuzzy Settings - fuzzy skin thickness 0.25mm & fuzzy skin point distance 0.4mm (these are what I used for the bunnies pictured; a thickness of 0.2 ~ 0.35mm should give an ideal result)
Thanks @JasonSkidmore for the idea to remix my Peeps Bunny.
Are you interested in selling your prints of my designs? Join my Printables Club, and start making 💰 with your idle printers!