1 / 1
The Original ChalkGripz - Jumbo Sidewalk Chalk Holder — zdjęcie 1

The Original ChalkGripz - Jumbo Sidewalk Chalk Holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

The Original ChalkGripz is a fast and easy 3D print for 23mm round chalk sizes but can resize for any chalk!

Ocena
5 / 5
Polubienia
31
Pobrania
123
Wydruki
4
Wyświetlenia
658
Oceny
4

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Outdoor Toys
Licencja
Creative Commons — Attribution — Share Alike

The Original ChalkGripz is a fast and easy 3D print for 23mm round chalk sizes but an easy re-size in your slicer and it fits ANY round chalk!

ChalkGripz are the over engineered chalk holder design for children of all ages.

Chalk simply inserts into the ChalkGripz and then you can use it like a pencil. Small hands will love the soft round edges that allow you to get a good grip on the chalk without getting your hands dirty.

Each grip uses pressure and small Gripz inside the model that grip the chalk with ease.

A round hole in the bottom allows you to easily push out any remaining chalk.

One print that you will use 5 walls/perimeters with 20% gyroid infill. Use a .2 layer height for a faster print. Also use inside to outside wall ordering to have better overhangs on the bottom.

This prints in about an 1.25 hours with Klipper.

Tagi