1 / 5
Shrine of Knowledge Bookends: Zelda Shrine Themed Bookends With Pencil Holder — zdjęcie 1
1 / 5

Shrine of Knowledge Bookends: Zelda Shrine Themed Bookends With Pencil Holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A Zelda Themed Bookend that doubles as a pencil holder: Store your pencils and books in style !

Ocena
0 / 5
Polubienia
116
Pobrania
260
Wydruki
0
Wyświetlenia
1715
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Office
Licencja
Creative Commons — Attribution — Share Alike

I wanted to design a Zelda themed bookend for my wife who loves the legend of Zelda and books.  When I found @KoalatyLegalGrey's pencil holder, I knew I had a great mesh starting point to modify into a book holder.  

While of course it seemed simple at first.. it took several hours of fiddling to repair the mesh and to get it to behave in a way that was compatible with the bookend design I wanted in Fusion 360.

 

Printing

  • Printed using Prusament's Gentleman's Grey PLA in 0.16 mm layer height, with 3 walls and 10% gyroid infill on my Bambu X1C, taking up nearly the whole bed space.  I'm sure 0.20 mm layer height would work as well.  
  • You might need to scale the whole thing down slightly if your print bed is smaller.  
  • I recommend a little bit of brim, even with PLA, because of the size of the print, and the longer time it will probably take.
  • I refined the model to use very little support for cosmetic reasons, but automatic tree supports/organic supports should work well.  See picture for where auto-supports worked well for me.  I used the “critical regions only” support button in Bambu Slicer.
  • Zelda tack-on logo prints straight on the bed with no supports in a gold silk PLA filament (no-name brand).  Attached with a little hot glue.

Other Notes

  • To top off the design, I added my own contrasting legend of Zelda emblem design in sparkling gold as a separate print that you can glue on easily with a little hot glue (or whatever).  This is optional, but I think the contrast with the dark blue-grey color really pops.  This is also a great candidate for painting, particularly if you print in a neutral grey-ish color.
  • The model is quite large due to the high level of detail in it, and could probably be remixed down to be less complex.  However I opted to leave the detail in and accept that it might slice a little slow given that slicing is mostly a one-time penalty here.

 

 

Tagi