Satisfying micro fidget spinner. Test your settings and printer without wasting filament
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This fidget spinner takes around 1 gram of filament and less than 10 minutes printing time
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 265
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other 3D Objects for Learning
- Licencja
- Creative Commons — Public Domain
If you're new to 3d printing or you want to test your new filament, here's a satisfying fidget you can print without wasting filament and time. This print requires ~1 gram of filament and prints within 10 minutes depending on your layer height. (0.2mm = 12 minutes). The catch here is to discover the “horizontal expansion” attribute, which needs to be set at -0.1mm. You should be able to spin the print after it's done. If you keep the setting at 0, you probably won't be able to spin it with a default 0.4mm nozzle. However, this print should demonstrate that you don't need a 0.4mm distance between gaps to obtain a perfect print while using a 0.4mm nozzle.
Print in place without supports
fidget_0_2mm has a 0.2mm gap.
fidget_0_1mm has a 0.1mm gap.