SuperTrickler Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stand for SuperTrickler. Can be used with or without the powder bowl.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 65
- Wydruki
- 0
- Wyświetlenia
- 619
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
SuperTrickler powder measure stand.
This design can be used independently, or it can be attached to the square SuperTrickler powder bowl that people are 3d printing.
The ring has a small B on what would be the "Back" of the ring. This would be at 12:00 if you were looking down at the ring like a clock.
It has 4 pillars (legs). IMPORTANT: Each pillar is unique!! They need to be positioned on the ring starting with number 1 at the 1:00 position, and working around the ring clockwise in numerical order. The pillars have a small keyway that matches with a cutout in the ring, so when they mate together you know the ring and pillars are in the correct position.
If you printed the powder bowl with any changes to the x or y dimensions, this will NOT work on your bowl.