REPAIR for Rubbish Grabber / Reach Hand / Waste Picking (Push Lever in Handle)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Easily REPAIR the small lever INSIDE the handle of this cheap grabber tool.
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 67
- Wydruki
- 1
- Wyświetlenia
- 906
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I ordered the grabbing tool ( short version / long version ) from the first picture to pick up rubbish in the playground together with my son.
Unfortunately the tool itself turned out to be rubbish after 2 or 3 minutes of use.
Inside the handle there was a small (~ 45mm long) push lever made from black plastic and it was broken.
So I (re-)designed this part. It doesn't look exactly like the original one since I obviously wanted to improve the strength of it.
Not sure if anyone else but me will need it, search for it and even find it here. So if you find this part useful, I'd really appeciate you to leave a comment or make. Thanks!
Print settings:
- small layer height ( I used 0.12 mm) to be able to print the overhangs without support
- 3 perimeters to give it strength
- ~25% infill