1 / 4
Prusa MK4 Adapter for 4.0mm PTFE Tube for Prusa Filament Guide — zdjęcie 1
1 / 4

Prusa MK4 Adapter for 4.0mm PTFE Tube for Prusa Filament Guide

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

An adapter so you can use regular PTFE tubing.

Ocena
4,933 / 5
Polubienia
86
Pobrania
634
Wydruki
20
Wyświetlenia
3775
Oceny
15

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution

This is an adapter for the Filament Guide by Prusa Research to allow the use of regular 4.0mm OD PTFE tubing. This is the regular PTFE tubing that fits 1.75mm filament that most 3D printers have laying around somewhere, and also often comes as a spare part. 

The adapter should fit snugly to the filament guide (no need for screws) and it should also be relatively difficult to get the PTFE tube in – but it does fit! That way you don't have to use glue or some other mechanism to hold the PTFE tube in there. 

Tagi