Electronic Tape Measure for Component Reels
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
bracket for electronic tape measure to allow easy measurement of component reels
- Ocena
- 5 / 5
- Polubienia
- 20
- Pobrania
- 71
- Wydruki
- 1
- Wyświetlenia
- 2642
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
This is a bracket that fits a $20 electronic tape measure from Amazon. This bracket holds 8mm wide component tape.
I highly suggest using "snug" supports at 0.2mm contact distance, and use top surface ironing for best fit.
Search amazon for "Electronic Digital Tape Measure" for various sellers. It has a STM32 inside, so you could probably modify the firmware to count components instead of centimeters.
Full disclosure: This was a quick evening project to buy me time until I get my BeanCounter (https://www.crowdsupply.com/great-big-factory/beancounter). It works pretty well and seems to provide repeatable results within +/-0.5mm, with inaccuracy induced by the start & end of the tape depending on how it is cut and how fast the end is pulled out.