Protognome - standing gnome remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of the Flexi Gnome by CM Designs but without the 'Flexi'
- Ocena
- 5 / 5
- Polubienia
- 84
- Pobrania
- 305
- Wydruki
- 6
- Wyświetlenia
- 1797
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter & Christmas & New Year's
- Licencja
- Creative Commons — Attribution
This is a remix for the body only.
Please download the rest of the files (beard, nose, hat) here and give the original designer a like.
Printing instructions:
Since this is a much simpler design than the original, you can use as little as 5% infill. It will also print in about half the time and I have tested it to work without supports. For the assembly and the rest of the settings follow this link. Enjoy!
Edited 4-12-23:
I noticed the mesh resolution may be too low for printing an upscaled model (over 150%), so I'm including a high def (HD) file with smoother surface. If you're only printing in the original size, the first (smaller) file is just fine.