VW California T5/T6 Tarp Rails Hook
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This thing makes it possible to fix a tarp (or another element such as a solar shower) on a Volkwagen California.
- Ocena
- 5 / 5
- Polubienia
- 21
- Pobrania
- 95
- Wydruki
- 2
- Wyświetlenia
- 1608
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
NOTE
This is just a re-upload of https://www.printables.com/model/31723-vw-california-t5t6-tarp-rails-hook by @Antoine_21086, fixing the STLs.
Original Description
This thing makes it possible to fix a tarp (or another element such as a solar shower) on a Volkswagen California.
Print instructions
- The hook and the plate are printed using a strong filament (PETG with Carbon) with 100% infill
- The sole is printed using a flex filament (TPU 98a) with 100% infill; You can also use the same strong filament as for the hook
- The button is printed using Prusament PETG filament with 15% infill.
1 - Requirements
You will need: - The four printed parts - A 20mm M5 bolt with hexagon head - An M5 insert (I use the ruthex variant) - Some strong glue - A soldering iron
2 - Glue
Glue together the hook and the sole on their respective flat face. Use a strong glue (I used "Pattex Extreme Repair"). Use the bolt to help you center both parts properly. Use clamps to maintain pressure.
3 - Insert
Introduce the insert into the button using a soldering iron.
4 - Assemble
Assemble all the parts together.
