Bambulabs X1C - Spoolholder alongside backplane
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Spoolholder mounted alongside the backplane of the printer. Thanks to BC.
- Ocena
- 0 / 5
- Polubienia
- 28
- Pobrania
- 141
- Wydruki
- 1
- Wyświetlenia
- 1558
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
I need the spool mounted alongside the backplane of the printer, so I have remixed the nice design fom BC. In fact only the spool-roller was untouched, the mount itself has been redesigned.
It should be possible to further reduce material-usage, so feel free to optimise.
Layer height: 0,20; Infill 25% Gyroid; 4 perimeters; top/bottom-layers: 3; printed in ABS without supports;
the spool-roller and the console have been printed with supports in PLA.
the additionally needed screws, washers, etc are in the pics.
Fusion360-parametric file is included.
20230410 - edit: changed to fit 3DJake 1kg rolls and adapted tolerances for better fit.