Dremel CNC - Fume extraction hose bracket (40 mm)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A bracket for Dremel CNC platform to hold a fume extraction hose with diameter of 40 mm. Intended for use with laser.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 273
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Public Domain
A bracket to click in place under the X carriage of the Dremel CNC inteded to hold the fume extractor hose (40 mm diameter). It was designed for the case, that you have a laser module mounted on Dremel CNC and use it for cutting or engraving. Those fumes can be smelly and sometimes (when cutting PVC) also very! corrosive. This tool holds the hose very close to the laser beam and allows for stable vapour extraction.
Print with PETG, 0,2 mm layer height and laying flat on the face with the legs going upwards (as in the picture on the table). Use supports on the buildplate.