Galaxy Watch 5 Pro stand for Spigen Rugged Armor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Resized version of @mmeidl78's Galaxy Watch 5 Pro Stand.
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 165
- Wydruki
- 1
- Wyświetlenia
- 785
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution
I really like the design of @mmeidl78 but as I use the Spigen Rugged Armor for my Galaxy Watch 5 Pro, the charging disc was not aligned with the watch and it didn't charge.
Remixing a mesh is not really one of my favorites so I build up a new model with Fusion360.
The holes on the bottom are not sized to fit a standard nut. I filled the holes with steel bearing balls and some epoxy resin to make the stand heavier.
The charging disc was a really tight fit for me so no glue was needed. I widened the hole a little bit before uploading but didn't test it.
My print has the original Samsung Galaxy Watch logo on it. I removed the logo for the upload to avoid copyright problems.
Print Settings
Printer:
Anycubic Vyper
Layer height:
0.2mm
Infill:
40% (to get some more weight from the model itself)
Supports:
No
Filament:
eSun PLA+ orange