Square/slotted Warhammer miniature bases
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Square/rectangular miniature bases, with optional slots compatible with 1980s-2000s Warhammer.
- Ocena
- 0 / 5
- Polubienia
- 29
- Pobrania
- 633
- Wydruki
- 1
- Wyświetlenia
- 2246
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Miniature Gaming Accessories
- Licencja
- Creative Commons — Attribution
This is a set of square and rectangular bases, with and without slots, compatible with Warhammer Fantasy miniatures from the 1980s to early 2000s.
The bases are solid, so the thickness of the top and sides of the base should be set in the slicer. Change top solid layers to 0 and infill to 0% to print hollow bases. I set perimeters to 3 and bottom solid layers to 6 at 0.15mm. All this is done in “Warhammer bases.3mf”.
If your slots are too tight or too lose, adjust “X/Y Size Compensation” under “Advanced” by 0.1mm or so.
Printing on a textured sheet gives a very similar surface to the original Citadel/Games Workshop “slottabases” (purple bases in the photos).
OpenSCAD code is provided, so you can easily generate a base in any size.
In the photos with two bases, the model on the left has an original Citadel base.