Morris car print in place with moving wheels
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Model can't be named or it'll be taken down, but enjoy this small! car. This model prints on its side with the wheels…
- Ocena
- 4,5 / 5
- Polubienia
- 18
- Pobrania
- 169
- Wydruki
- 3
- Wyświetlenia
- 603
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Share Alike
Model can't be named or it'll be taken down, but enjoy this small! car.
This model prints on its side with the wheels and axle built in, print it as oriented and the wheels will spin. No supports need and .2mm layer height worked for me.
If the model appears non-manifold in slic3r try slicing with Cura, I was unable to repair the model so that slic3r would recognize it.
See my collection for more cars: https://www.printables.com/@MichaelDasaro_749420/collections/933213
Category: Vehicles