Universal tablet holder for cars/headrest (fully printable)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a very strong and universal fit tablet holder for all cars and various tablet sizes.
- Ocena
- 4,917 / 5
- Polubienia
- 753
- Pobrania
- 4828
- Wydruki
- 45
- Wyświetlenia
- 21 439
- Oceny
- 48
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Leave a Like or a Make to support me ;)
I could not find such a mount anywhere that fits all cars and all tablet sizes. Therefore, I have now developed a model which is completely printable.
I created two sizes, once 130-200mm (5.1-7.9 inch) for "normal" devices and 190-280mm (7.5-11 inch) for large tablets. I recommend using PETG as it is much stronger than PLA. Also, it does not deform easily in a hot car.
The holder including tablet can be easily removed while driving (if the kids have pressed something wrong again ;) ) and you have to get it to the front.
All moving parts can be arranged so that they can not loosen during use. In addition, the mount can be screwed tightly with the assembly tool and put under tension.
What packages you need:
1x Basic holder
1x Tablet holder 130-200mm or Tablet holder 190-280mm
I printed all the parts with the following settings:
4 Walls
30% Infill - Cubic
0,2mm Layer (important for the function)
No support needed
Also check out my phone holder for cars!
