3D Printer Nozzle Sculpture
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sculpture based on a .4mm Nozzle scaled up by a factor of ten. (1000% Scale).
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 128
- Wydruki
- 1
- Wyświetlenia
- 472
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Public Domain
Printing Instructions
The model already contains custom supports, designed for this specific use case. (Use the version titled “NozzleSculptureCustomSupports”) The support Structure should release cleanly from the actual model, leaving hardly any marking behind. Note that the support structure is designed to have a width of a single extrusion, when printed at 100% scale with a .4mm nozzle. This can lead to problems with when scaling the print down. (Scaling the print up should not cause any problems).
Additionally, a version of the model without custom supports is provided (titled "NozzleSculpture"). This can be useful if printing at a lower Scale or significantly upscaling the model.
- Material: PLA
- Supports: Model already includes custom supports
- Brim: none
Print orientation