DIN rail clip with 25 mm hole spacing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Original model mesh-remixed to move the outer screw holes to 25 mm spacing.
- Ocena
- 4 / 5
- Polubienia
- 21
- Pobrania
- 228
- Wydruki
- 1
- Wyświetlenia
- 834
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I moved the cutouts for the screw holes and nut slots slightly so that the distance is 25 mm between the furthest holes (compared to 18 mm in the original model). I used OpenSCAD for this. The result is ugly, but works for my intended use case which is to mount a HARDWARIO Base Module centered on a DIN rail.
The maximum screw length is reduced to 6 mm (compared to about 9.4 mm in the original model). No particular reason for this, I just picked some number for the new depth that worked for me.
Printed in PLA at 0.2 mm layer height. The springy mechanism is springy enough for it to be easily removable.