Baby Food Pouch Hanger
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Storage for baby food pouches
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 52
- Wydruki
- 0
- Wyświetlenia
- 809
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Designed this as a storage solution for baby food pouches. It works best with the pouches that have a round cap (as pictured) but I have used it for other types as well. It was designed to hang from the wire shelving and take full advantage of the space between racks. Each holder is capable of holding 6-7 pouches.
For each one you will need to print one “Holder V2” and two of each of the other models. The RH and LH are necessary to prevent the caps from unscrewing will installing/uninstalling the holder in the shelving.
Print settings:
Printed out of PLA
0.3mm layer height
60% cubic infill
3 perimeters
Supports are required for the holder itself but the other files can be printed without supports