Shark Rocket Wall Mounted Hanger
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wall mounted storage for Shark Pet Pro cordless vacuum or other tools
- Ocena
- 5 / 5
- Polubienia
- 25
- Pobrania
- 322
- Wydruki
- 2
- Wyświetlenia
- 2131
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Originally designed this to store our cordless shark pet pro vacuum on the wall (IZ162HC | Shark® Rocket® Pet Pro Cordless Stick Vacuum - Shark (sharkclean.ca)). It has an extended back plate to ensure that the battery doesn't scratch up the wall. It fits this vacuum perfectly but I'm sure it would work for other cordless vacuums as well.
I printed a second one and use it for storage of our weed eater/trimmer and it works well.
Print Settings:
PLA
0.3mm layer height
Print with the back plate on the bed and all supports enabled
Print with 43 solid bottom layers to ensure the backplate can handle the weight
Remainder can be printed with 50% infill and 4 perimeters.
The “strength” parameters can be reduced if the intended weight is less than the weight of the Shark at 7.5 lbs.