Raspiberry Pi B with 3.5in LCD case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Need to put a 3.5 LCD on a raspberry pi B ( 2 usb port ), and adopted the design of these two cases:…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 306
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
Need to put a 3.5 LCD on a raspberry pi B ( 2 usb port ), and adopted the design of these two cases:
http://www.thingiverse.com/thing:256960 http://www.thingiverse.com/thing:1229473
You will need some m2 screws ( 12~20mm long ) to screw them all together.
I was trying to do a door cam, so the camera mount will be separated.
The LCD used was the cheap 3.5in LCD from Ebay, which have the text "3.5 inch RPI LCD V3.0" on it.
If you still have a older Pi lying around and want LCD on it, this one might work for you.
Category: 3D Printer Accessories