1 / 2
XL printable parts
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Original Prusa XL printable parts
- Ocena
- 4,935 / 5
- Polubienia
- 1167
- Pobrania
- 21 102
- Wydruki
- 116
- Wyświetlenia
- 62 148
- Oceny
- 93
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- GNU General Public License v2.0
SzczegółyPliki (174)Wydruki i komentarze (Wydruki: 116) (Komentarze: 226)Remiksy (171)Kolekcje (1516)Powiązane
All printable parts for your Original Prusa XL. The parts are divided into folders based on subassemblies.
Print instructions
- ATTENTION: Two materials (PETG and Polycarbonate) are recommended for the printable parts. Read the following list carefully.
- Download the latest PrusaSlicer
- For 0.6 nozzle
- Parts from PC Blend Carbon Fiber
- print settings**: 0.25mm QUALITY, 4 perimeters, 30% Grid infill
- list of parts:
- x-carriage
- y-carriage-left-base
- y-carriage-left-top
- y-carriage-right-top
- y-carriage-right-base
- entry-fs-insert
- fan-shroud
- dock-cable-router-parking-plate-cap
- dock-cable-router-parking-plate-support
- Parts from PETG
- print settings**: 0.25mm QUALITY, 15% Grid infill
- list of parts:
- all the parts except the ones mentioned above
- Parts from PC Blend Carbon Fiber
- For 0.4 nozzle
- Parts from PC Blend Carbon Fiber
- print settings**: 0.20mm STRUCTURAL, 4 perimeters, 30% Grid infill
- list of parts:
- x-carriage
- y-carriage-left-base
- y-carriage-left-top
- y-carriage-right-top
- y-carriage-right-base
- entry-fs-insert
- fan-shroud
- dock-cable-router-parking-plate-cap
- dock-cable-router-parking-plate-support
- Parts from PETG
- print settings**: 0.20mm STRUCTURAL, 15% Grid infill
- list of parts:
- all the parts except the ones mentioned above
- Parts from PC Blend Carbon Fiber
** Note that print settings are recommended, but you can experiment with your own.