Pully Timing parametric
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
OpenScad Script for generating a library of Pulleys
- Ocena
- 0 / 5
- Polubienia
- 81
- Pobrania
- 457
- Wydruki
- 0
- Wyświetlenia
- 1567
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Share Alike
This is an OpenScad script pully module based on the pully module by
by droftarts January 2012
https://www.thingiverse.com/thing:16627
Code has been completely re-written, condensed, and multiple features and options added.
All parameters are configurable through the OpenScad customizer.
All of the same tooth profiles are maintained...
Tooth profiles currently supported are:
profile == 0 for MXL
profile == 1 for 40 D.P.
profile == 2 for XL
profile == 3 for L
profile == 4 for T2.5
profile == 5 for T5
profile == 6 for T10
profile == 7 for AT5
profile == 8 for HTD 3mm
profile == 9 for HTD 5mm
profile == 10 for HTD 8mm
profile == 11 for GT2 2mm
profile == 12 for GT2 3mm
profile == 13 for GT2 5mm