DryboxSpoolholder for Atomic 1kg Filament Spools with desiccant reservoir and humidity sensor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Minimalist drybox designed for use with atomic 1kg filament spools. Desiccant in spool shaft. Requires purchased parts.
- Ocena
- 5 / 5
- Polubienia
- 27
- Pobrania
- 48
- Wydruki
- 1
- Wyświetlenia
- 1326
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Public Domain
Included are models of the 3 printed parts in the assembly. The purchased parts (not including desiccant beads) are as follows:
Humidity sensor: https://www.amazon.com/dp/B07GNMKYCZ?psc=1&ref=ppx_pop_dt_b_product_details
Screw Handle O-Ring: https://www.mcmaster.com/9452K142/
Lid radial O-Ring: https://www.mcmaster.com/9452K329/
Bowden tube and fitting that I used: https://www.amazon.com/dp/B07PS3NH82?psc=1&ref=ppx_pop_dt_b_product_details
The o-rings are optional but will prolong the life of the desiccant. Humidity sensor is also optional, I more included it to prove to myself that the drybox was working but it's fun and I like it. If you don't want to use it I suggest modifying the model before printing.
Bowden tube fitting is installed in a self tapping manner. I sealed around it with hot glue just to be thorough.
Found this model useful? Buy me some filament!