Another inline clip mod for Nerf Big shock (Telcon Ver.)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modify the 'Nerf Big shock' into an inline clip version that holds up to 7 half darts.
- Ocena
- 5 / 5
- Polubienia
- 72
- Pobrania
- 197
- Wydruki
- 2
- Wyświetlenia
- 2052
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
I made a version with an extended ammo count referring to the cool pioneers' mods for the nerf big shock.
We referenced the design of the existing mods a lot, but since most of them have been redesigned, please note that the main parts are not compatible.
- It is modified to assemble using locknuts, so there is no strain on the parts even when reassembled.
- Increased ammo count a little more. (6~7 darts)
- Added new grip parts.
- New prime grip matched to the grip angle
- more rails
Hardware
Mainly M3 series bolts and locknuts are required.
Optional parts are not required, but it is good to have them. :)
- Nerf Big Shock with AR removed
- 17/32 K&S Brass tube
- M3 Lock nut - 12
- M3x16 (Flat head) - 2
- M3x10 (Socket head) - 1
- M3x12 (Socket head) - 5
- M3x15 (Socket head) - 2
- M3x16 (Socket head) - 1
- M3x45 (Socket head) - 1
- AN-012 O-ring - 1
- (Option) OD 22mm, 2T O-ring - 2
- (Option) M3 Washer - 1
Printing
All parts are designed to be printed without a supporter according to the overhang setting. (However, please decide whether or not to support it according to your printer settings.)
Print some parts using brim or raft.
Ass'y Guide
Please refer to the following guide image.
Update
23.04.11 - The mag adapter part has been extended a bit more. (Fit for simple stock)
23.04.12 - Extend the length of the mag cover 3 (prevent rear opening during firing)